Kodak SRP 30 - Manual (Page 107)

Operator’s Guide
Learning TFS Learns and Learning TFS Used
TFS stands for Total Film Scanning. When you enable the Learning TFS learns and
Learning TFS used functions, the system seeks to ensure a uniform production by
compensating color dominants and emulsion fluctuations.
During the learning phase (at least 22 different scans of the same film type), the
system uses standard values. The film type-specific values resulting from the
prescan are only effective afterwards. The learning phase continues for all film types.
The learning TFS is based on the DX code. Because the fluctuations resulting from
film processing differences are stronger than the differences among film types, the
best results are obtained with films that have been processed, if possible, in an
identical or similar way.
Learning TFS Reset
The values found for all films are reset. Enable the Learning TFS Reset function
only if the production deteriorates. Then the learning process begins again.
IMPORTANT: Use different films of the same type for the learning phase. Do not
use the same film 22 times. Otherwise, the statistics will be invalid.
4-32 KODAK PROFESSIONAL SRP 30 Laser Printer