Kodak SRP 30 - Manual (Page 181)

Operator’s Guide
Order Handling
Typical Order Tracking
Orders are tracked with the use of Twin Check labels that contain the order number.
Matching labels are placed on the envelope and on the film.
The order number may also be printed on the back of the prints along with other
information so that the allocation of the prints to the corresponding film order is
simplified.
Price labels can be printed with the optional Pricing and Label printer accessory.
Prerequisites
Before beginning production, check that:
•
All equipment and user-specific settings are completed. (See Chapter 4, Settings.)
•
All configurations required for the production are created. (See Chapter 4,
Settings.)
•
All maintenance procedures required prior to production start are completed. (See
Chapter 8, Maintenance.)
•
The equipment is prepared for the first order:
−
Correct paper is installed in the paper magazine. (See Installing Paper on
Page 6-5.)
−
Paper magazine is correctly coded. (See Coding the Paper Magazine on Page
6-6.)
−
Matching film mask is inserted. (See Changing the Film Mask on Page 6-1.)
−
Order sorter is in the working position. (See End of Order (Automatic or Manual)
on Page 6-13.)
•
The equipment is switched on and ready to operate. (See Chapter 4, Settings.)
•
The operator is logged in. (See Chapter 4, Settings.)
•
The paper is calibrated. (See Chapter 5, Tests.)
6-10 KODAK PROFESSIONAL SRP 30 Laser Printer