Kodak SRP 30 - Manual (Page 124)

Settings
All settings that are needed to produce the desired print size (for example, 9x13) of a
film size in use (for example, 135 full frame) are saved in the Print configurations.
For this reason, the following configurations are defined in the indicated order:
1 Paper
2 Back print
3 Correction
4 Autosave
5 Front print
6 Index print
7 Combiprint
8 Order (Single, Package, Passport Photo, Reproduction)
NOTE: Order configurations are combined on the basis of the other seven print
configuration types. One or more of these “sub-configurations” must be
created before you can create an order configuration.
You can use a sub-configuration in any number of order configurations.
The procedures for creating print configurations are explained in the following
sections.
KODAK PROFESSIONAL SRP 30 Laser Printer 4-49