Kodak SRP 30 - Manual (Page 38)

Overview
Description of the Operating Controls
Buttons and Lamp on the Main Computer
There are two buttons and one lamp on the main computer:
•
ON button (1)
If the system is shut down by End of work – Shutdown, it remains in the timer
mode until the next automatic startup. If you must operate the system before the
next automatic startup time, press the ON button. The system will then start up.
You can also press the ON button to initiate a reset.
•
The timer lamp (2) lights if the system is in the timer mode after Shutdown.
•
Film stop button (3)
If you suspect a film jam, press the Film stop button to stop the system. The film
stops during scanning (orders are interrupted and a reset of the system begins).
The Reset confirmation window opens on the screen. Wait until the paper transport
in the printer is empty. Then touch Yes to confirm.
For more information, see:
•
Automatic Startup on Page 2-11.
•
Resetting the Equipment in Chapter 7.
KODAK PROFESSIONAL SRP 30 Laser Printer 2-19