Kodak SRP 30 - Manual (Page 151)

Operator’s Guide
For an explanation of the Standard button, see Defining a Standard
Configuration on Page 4-79. NOTE:
Combiprint Configurations
Use this order configuration for multiple printing of a picture in different sizes or the
same size (ID or passport photos) on one sheet of paper.
1. From the Order configurations - List screen (Page 4-67), touch New, or select
an existing combiprint configuration (designated by “C”) and touch Edit.
2. Select a Film mask and Film type.
3. Touch Config. type and select Combiprint.
You can only change Config. type if you selected New from the
Order configurations - List screen. NOTE:
4. Select the appropriate sub-configurations or set Off.
5. Touch PpF and select the number of prints per frame (preset = 1). To create a
value not listed, use the New entry for PpF option.
6. Touch Border and select a border from 4–60 mm or set to 0 for borderless
prints. To create a value not listed, use the New entry for border option.
7. Touch Combiprint and select from the list of layouts available for the selected
film mask.
8. These buttons are available if you select File print for the film mask:
•
Fit image to paper
•
Fill print size
•
Adjust: Shorter side
•
Adjust: Longer side
Enable the appropriate function. For descriptions, see Film Mask: File Print on
Page 4-70.
9. Touch Save as and enter a name, or touch Cancel to return to the previous
screen without saving.
4-76 KODAK PROFESSIONAL SRP 30 Laser Printer