Kodak SRP 30 - Manual (Page 201)

Operator’s Guide
File Print Mode
Use File Print mode to print images from a digital source.
When working with digital input sources, remember:
•
Only jpg, bmp, and uncompressed tif files can be processed.
•
Digital cameras supply Gamma values between 1.8 and 2.2. The SRP 30 Laser
Printer prints with a Gamma of 1.8.
•
The maximum size of each file is 110 MB (tif, bmp; jpg unpacked). Larger files are
not printed.
•
The maximum size of each total order is 400 MB. Larger order files create handling
problems.
•
The print size should be adjusted to the aspect ratio (indicated by .... x .... pixels)
of the image. Touch a suitable adjustment method. Otherwise, the error message
File print parameter range violation will appear.
−
Fit image to paper
−
Fill print size
•
The quality of the prints depends on the relationship between the resolution and
the print size:
Minimum approx. 100 pixels per cm
approx. 200 pixels per inch
IMPORTANT:
IMPORTANT:
For images created with ADOBE PHOTOSHOP:
•
Save files only in tif, bmp or jpg formats.
•
Use a Gamma value of 1.8.
•
Convert CMYK (additive colors) to RGB (subtractive).
dTFS (Only for File Print)
This function compensates for the different characteristics of digital cameras. Activate
this function only if at least five exposures were made with the same camera. The
exposures are put together to a series—similar to film—and the corrections are found
for them.
Do not use dTFS for the following conditions:
•
for manipulated, artificially modified digital exposures
•
for images created with graphic programs
•
for images taken with different cameras
•
for orders with fewer than five frames
Record the following information when an order is received:
•
Have the digital images been taken with different cameras?
•
Have the images been created by the customer with a program such as ADOBE
PHOTOSHOP?
•
Have the digital images been edited with a program such as ADOBE
PHOTOSHOP?
6-30 KODAK PROFESSIONAL SRP 30 Laser Printer