Kodak SRP 30 - Manual (Page 276)

Maintenance
Cleaning Procedure
Clean the CD feed unit, tank crossovers, and the squeegee unit and V wipers at the
beginning of the scheduled cleaning day.
1. Clean the CD feed unit and tank crossovers.
a. Clean the rollers with a soft brush.
b. Clean the paper slide surfaces with a lint-free cloth.
c. Rinse thoroughly in running water.
2. Clean the squeegee unit and V wipers.
a. Clean the rollers of the squeegee unit with a soft brush.
CAUTION:
IMPORTANT:
Do not damage the wiper edges of the V wiper. Check for
damage.
b. Clean the paper slide surfaces of the squeegee unit and V wiper holder with
a lint-free cloth.
3. Mount the V wiper holder in the squeegee unit. Check that it locks into place.
Observe the attached color markings and numbering when
reinstalling the tank crossovers and the squeegee unit. Check that
the latches of the units lock in and are flat against the housing.
4. Reinstall, the squeegee unit, the crossovers, and the CD feed unit.
KODAK PROFESSIONAL SRP 30 Laser Printer 8-23