Kodak SRP 30 - Manual (Page 229)

Operator’s Guide
APS Films
The size set on the APS camera is indicated by C, H, and P (Classic, High Vision,
and Panorama) under the Images per Index print in the Indexprint configurations
screen.
The crop setting stored on the film is always shown (a line in the single image), even
if a different crop is printed.
File Prints
The filenames are printed as subtitles.
Number / Aspect Ratio of the Single Images per Index Print
Number
For film strips
≥
400 mm, the number of single images is automatically selected by
the SRP 30 Laser Printer so that the scanned film fits on the index print: 15, 25 or 40
images.
For film strips < 400 mm and slides, there are only 25 (for APS) or 40/42 (for all other
film sizes) images per index print. The distribution to several Index prints is done
automatically.
An order may hold up to a maximum of 42 images. Larger file print orders are
therefore split up so that the customer gets several index prints.
Aspect Ratio
The aspect ratio of the images of the index print corresponds to the one of these
image sources:
9/16 APS
2/3
135 color frame, slide, B/W, 6x9
1/1 6x6
3/4 4.5x6
100/77 Image files
For file print, a single image is reduced so that it fits in the predefined window if the
image data has a different aspect ratio.
Index Prints in the Different Print Modes
Index prints are printed automatically at the end of the order if this has been specified
in the configuration.
For Autoprint without Preview
All frames are shown on the index print with the corrections of the configuration in
use.
For Autoprint with Preview
In this mode, all scanned frames (not only the printed ones) are shown on the index
print, with the corrections used for the first print. Additional manual corrections are
not taken into consideration. Each frame appears only once on the index print, even if
it was printed in several versions.
6-58 KODAK PROFESSIONAL SRP 30 Laser Printer