Kodak SRP 30 - Manual (Page 123)

Operator’s Guide
•
Back print
Enable this parameter to select a back print for the File print mode. If this
parameter is disabled, you cannot select a back print for the order.
The back print in the Network order print mode is always controlled by the
order data created at an external workstation, independent of the status of the
Back print parameter in this menu.
•
dTFS Preselection
Enable this parameter to preset dTFS in the File print mode. If the parameter
is enabled, dTFS is available for selection in the order menu. Otherwise, it is
not available.
3. Touch Save or Cancel.
Print Configurations
Touch:
•
Settings
•
Print configurations
4-48 KODAK PROFESSIONAL SRP 30 Laser Printer