Kodak SRP 30 - Manual (Page 190)

Production
Autoprint Print Mode
Use this print mode to print images from film.
1. Touch:
•
Print mode
•
Autoprint
2. Touch the Configuration button and select an order configuration from the list
or
Touch Change configuration and change the settings of the currently selected
order configuration.
To view details of the current configuration, touch Show Configuration. NOTE:
NOTE:
3. Touch Change order no.? if you want to enter a new order number (and if the
Order no. parameter in Settings / Machine settings / Other is set to Manual).
4. Enable or disable Preview.
5. To begin the printing process, insert the film strip into the film feeder, emulsion
side down.
If Preview is enabled, the Preview screen appears. Go to Step 6.
If Preview is disabled, the order begins to process and the status is displayed at
the bottom of the screen. Go to Step 10.
It is not possible to switch to Autoprint with Preview while an order is
processing.
KODAK PROFESSIONAL SRP 30 Laser Printer 6-19