Kodak SRP 30 - Manual (Page 238)

Correcting System Conditions
Reset Using the Stop Button on the Screen
Use this reset method if the equipment no longer responds to operator entries.
1. Touch the red Stop button on the screen to initiate a software reset.
The system moves the film and paper out, stops the order in progress, and
opens the Reset pop-up window containing Yes and No buttons.
IMPORTANT: Before continuing, wait until the paper transport in the printer is
empty. Otherwise there is the risk of a paper jam.
To verify that the paper transport is empty:
•
Check that no sound is coming from the printer.
•
Touch i and check the position of the prints using the Info function.
2. When all prints are in the paper processor, touch Yes to start the reset.
The system initializes the main assembly groups and deletes information
regarding previous orders (such as Reorder lists). This process takes about 3
minutes.
KODAK PROFESSIONAL SRP 30 Laser Printer 7-5