Transport unit at the bottom, Transport unit at the bottom -12 – Kodak SRP 30 User Manual

Page 245

Operator’s Guide

Transport Unit at the Bottom

With the print engine pulled out:

1. Release the two locking levers (1) and pull the transport unit out on the

telescopic rails.

2. Open the lever (2) and hold it against the unit as the bottom part of the transport

releases.

3. Pull the flap (3) up and slowly lower the bottom part of the transport unit.

4. Remove the jammed paper from the paper transport.

5. Return the flap (3) to the operating position.

CAUTION:

The flap (3) must be flush to the side of the transport before you
close the lever (2).

7-12

KODAK PROFESSIONAL SRP 30 Laser Printer