Kodak SRP 30 - Manual (Page 147)

Operator’s Guide
Film Mask: APS (IX 240)
This screen results from selecting New or Edit from the Order configurations – List
screen (Page 4-67).
1. Select the appropriate sub-configurations or set to Off.
2. Touch PpF and select the number of prints per frame (preset = 1). To create a
value not listed, use the New entry for PpF option.
3. Touch Border and select a border from 4–60 mm or set to 0 for borderless
prints. To create a value not listed, use the New entry for border option.
4. Touch:
•
C paper config. and select a paper configuration for Classic
•
C cut length and select a cut length for Classic
•
H paper config. and select a paper configuration for High Vision
•
H cut length and select a cut length for High Vision
•
P paper config. and select a paper configuration for Panorama
•
P cut length and select a cut length for Panorama
5. Touch Save as if you are creating a new configuration, and enter a name.
Touch Save to save changes to an existing configuration.
Touch Cancel to return to the previous screen without saving.
4-72 KODAK PROFESSIONAL SRP 30 Laser Printer