Kodak SRP 30 - Manual (Page 28)

Overview
Paper Processor
The exposed paper advances through the processing solutions (1), which include the
developer, bleach-fix, and stabilizer. The paper then advances through the dryer (2).
Sorter
After drying, the prints exit from the print chute (1) into the sorter (2) where they are
sorted by orders and stacked in trays.
•
If a print order exceeds the capacity of one tray (a maximum of 43 prints), the
sorter automatically switches to the next tray without terminating the print order.
•
Splices in the paper rolls are cut separately and the respective pieces of paper are
deposited in the print order stack.
•
Large prints are deposited on the large print deposit tray (3).
KODAK PROFESSIONAL SRP 30 Laser Printer 2-9