Kodak SRP 30 - Manual (Page 176)

Production
6. Adjust the guides in the other section of the magazine in the same way.
NOTE:
IMPORTANT:
If several paper types are used, we recommend preparing several
magazines for each paper width.
Installing Paper
Photographic paper must always be stored in a cool and dry place.
The best storage temperature is between 2°C and 10°C (36°F and
50°F).
1. Take the paper out of the cool storage at least 24 hours before use to let any
condensation on the paper dry.
2. In the darkroom, take the paper roll out of the package and push the core
through the roll.
3. While observing the winding direction, put the paper in the magazine.
4. Push the paper tip through the two brackets on the magazine outlet.
5. Pull the paper slightly out of the magazine. Hold the paper with one hand and
close the magazine with the other hand.
6. To prevent pre-exposure of the paper tip, return the paper to the magazine.
Rotate one of the gears located on the side of the magazine opening until the
magazine latch locks.
KODAK PROFESSIONAL SRP 30 Laser Printer 6-5