Kodak SRP 30 - Manual (Page 226)

Production
Printing Network Orders
NOTE: You must create a print configuration with the required paper width
beforehand so that the network order can be printed.
The SRP 30 Laser Printer can be connected to several workstations in the lab. These
workstations can send completely prepared orders at any time to the SRP 30 Laser
Printer for printing. Each order consists of the image files and a descriptive file that
contains information about the back print text, the print size, the number of prints per
image, and the configuration.
Supported formats are:
•
PFDF (Photofinishing Data Format) for the complete orders
•
jpg, bmp, tif for the single images of a complete order
The workstation can send orders at any time. When the files reach the SRP 30 Laser
Printer, the orders are executed automatically, without Preview.
Starting Network Orders
Network orders are initiated at a remote workstation equipped with
KODAK PROFESSIONAL Digital Print Production Software or other suitable
software. When a workstation is preparing to send network orders, the message
“Network connection being established...” flashes on the printer monitor
approximately every 25 seconds. When the network connection is established, orders
start transmitting and the following screen opens.
The network orders print automatically until all are completed. Orders requiring a
different paper width than is currently installed on the printer are skipped.
You can stop network orders from printing by touching the blue Stop button. The
current order is completed, but any additional orders are terminated.
KODAK PROFESSIONAL SRP 30 Laser Printer 6-55