Kodak SRP 30 - Manual (Page 241)

Operator’s Guide
Gray Screen After Reset
If the screen remains gray for more than 3 minutes after a reset, press the ON key on
the scanner.
Image Processing Errors
It is possible to have several images that cannot be printed, but only the last image is
displayed. If this happens, touch Clear.
NOTE: Types of adjustment for File Print mode:
•
Fill Print
Center crop; image information getting lost
•
Fit image to paper
The whole image remains unchanged, but a border is added.
If Fill print is selected, the aspect ratio of the frame must approximately correspond
to that of the print size. If there are larger differences, the error message Parameter
range violation appears. The image can then only be exposed with Fit image to
paper.
Paper Processor Errors
Some errors cause the printer to stop. If paper is still in the transport area of the
printer, you must remove the paper before work can continue.
If an error occurs during a reset, a message appears indicating that there are
unrepaired errors. You must clear these active errors from the error list.
1. Disable the Show all errors option to display only active errors.
2. Do a reset.
7-8 KODAK PROFESSIONAL SRP 30 Laser Printer