Kodak SRP 30 - Manual (Page 118)

Settings
Production Balance – Digital
1. Touch:
•
Settings
•
Machine settings
•
Production Balance
2. Enable the Digital production balance function.
IMPORTANT: Changes in the parameters will shift the printed results in one
direction, but will also have an effect on the result in the other
direction. For this reason, only experienced operators should modify
parameters.
•
The settings influence all orders.
•
Modifications are only effective after a new start.
The settings of the Production balance (surface and detail contrast, sharpness and
saturation, etc.) do not show in the back print because the Production balance
specifies the basic setting (0 value).
Correction values entered later (by way of correction configurations or for image
improvement) are added to this 0 value and can appear in the back print. For color
and density corrections, the weighing depends on the entered correction strength.
(See Impact on Page 4-29.)
KODAK PROFESSIONAL SRP 30 Laser Printer 4-43