Kodak ENDURA CIS-241 - Manual

©Eastman Kodak Company, 2005
May 2006
•
CIS-241 TECHNICAL DATA / COLOR PAPER
Calibration Routines for KODAK
PROFESSIONAL ENDURA Metallic
Paper
GENERAL INFORMATION
KODAK PROFESSIONAL ENDURA Metallic Paper is
optimized for both digital and optical printers. Significant
testing has been done across a broad range of Kodak
Professional and OM digital printers to validate satisfactory
digital performance of KODAK PROFESSIONAL
ENDURA Metallic Paper.
Kodak’s Printer Calibrations for KODAK
PROFESSIONAL ENDURA Metallic Paper
To achieve optimal quality prints on KODAK
PROFESSIONAL ENDURA Metallic Paper with Kodak
digital output devices such as the KODAK
PROFESSIONAL Digital Multiprinter or the KODAK
PROFESSIONAL RP 50 LED Printer, you must install new
calibration files.
The latest calibration files for Windows NT and 2000
(V4.3) and Macintosh (V4.3) operating systems are
available at www.kodak.com/go/servicesupport. If your
printer does not have the newest calibration files, download
and install them at this time. (Windows XP users will need
the additional updater file.) Then download the "paper
updater" file that includes the necessary data to calibrate
both ENDURA Metallic paper and KODAK
PROFESSIONAL ULTRA ENDURA Paper. These files
currently support:
LED printers, including:
• KODAK PROFESSIONAL RR 30 Laser Printer
• KODAK PROFESSIONAL RP 30 and SRP 30 Laser
Printers
• KODAK PROFESSIONAL RP 50 LED Printer
• KODAK PROFESSIONAL LED II Printers 20R and
20P
• KODAK PROFESSIONAL LED Digital Color Printers
20R and 20P
CRT printers, including:
• KODAK PROFESSIONAL Digital Multiprinters
(KPDM & KPDM II)
• KODAK DIGITAL SCIENCE LF CRT Color Printer
• KODAK 4" CRT Color Printer
Other Equipment Manufacturer’s Printer
Calibration for KODAK PROFESSIONAL
ENDURA Metallic Paper
The starting-point recommendations listed in the following
table have yielded good image quality in prints on KODAK
PROFESSIONAL ENDURA Metallic Paper produced by
other equipment manufacturers' digital output devices.