beautypg.com

Print engine, Print engine -14 – Kodak SRP 30 User Manual

Page 267

background image

Operator’s Guide

Print Engine

1. Release the two locking levers (1) and pull the print engine (2) out on the

telescopic rails.

2. Press the toggle on the upper guide plate (1) and remove the plate.

3. Pull down on the back of the lower guide plate (2) and remove the plate.

4. Remove the paper dust from the print engine and both guide plates with a

vacuum cleaner.

5. Reinsert both guide plates. (For the lower guide plate, insert at an angle and

press firmly up and in until the plate locks in place.)

8-14

KODAK PROFESSIONAL SRP 30 Laser Printer

See also other documents in the category Kodak Printers: