Motorola 68P02958C00-B - Manual (Page 84)

Site Configuration
5-27
Advanced Physical and Link Layer Parameters for Port 4
After clicking one of the advanced parameters tabs, you can use the following functions:
• After changing a parameter, you can restore all changes to their default, by clicking the
Default icon.
• Modified parameters appear against red background the next time you access the
parameter list.
Parameters are reviewed in Advanced Parameters in this chapter.
Zones in Port 4
For details about zones, see the Zones in Port 3 section above.
IP Port
The IP Port (Port 1) supports the following applications:
• DataTAC
• TCP/IP
• Terminal Server
One or more applications can be defined. By default, only TCP/IP is selected, as shown below.
To define either DataTac or Terminal Server, right click on the item in the treeview and select
Define from the right-click menu.
Note: The TCP/IP option cannot be removed from the Selected applications. However, the
Media in the TCP/IP Port Type can be set to Not Used.
Port Type for TCP/IP Port 1
Currently the only option for TCP/IP Port 1 besides NOT USED is:
Ethernet, TCP/IP, MDLC Over IP
User Parameters for TCP/IP Port 1
A description of the User parameters follows.
IP Gateway IP Address
IP address of the IP Gateway. For information on this and other IP Addresses in the
configuration, see your network administrator.
Default Router IP Address
Range: 000.000.000.001-255.255.255.254
Net Mask Address
Range: 000.000.000.001-255.255.255.255