2301 level = 1 – Motorola 68P02958C00-B User Manual
Page 386
Software Diagnostics Output
C-94
14. Timeout in seconds in which no data was received and disconnecting/reactivating SLIP/PPP.
15. Time elapsed in seconds since the last received SLIP/PPP data from port.
16. Is PPP/SLIP driver in the process of being disconnected?
17. Is PPP/SLIP driver in the process of being connected?
18. Not relevant.
19. Not relevant.
20. Was an AT response noted when receiving data in SLIP/PPP mode? An AT response can be
ERROR, +CME ERROR, AT, ATH, etc. It indicates that the modem has moved to command mode
and therefore the driver needs to be disconnected.
21. Not relevant.
22. Not relevant.
## 2301 LEVEL = 1
PPP Status
---------------
LCP
Layer Status: %%1
IPCP Layer Status: %%2
PAP
Layer Status: %%3
CHAP Layer Status: %%4
PPP State
---------------
LCP
Layer State: %%5
IPCP Layer State: %%6
PAP
Layer State: %%7
CHAP Layer State: %%8
Terminate
Configure
Failure
---------
---------
-------
LCP
Layer Retry: %%9
%%9
%%9
IPCP Layer Retry: %%10
%%10
%%10
PAP
Layer Retry: %%11
%%11
%%11
CHAP Layer Retry: %%12
%%12
%%12
PPP Configuration
My
Their
Negotiated
-----------------
------------
--------------
----------
Asyncctl
:
%%13
Magic
:
%%14
Maxmtu
:
%%15
Auth
protocol:
%%16
Quality
protocol:
%%17
Protocol comp.
:
%%18
Address
comp.
:
%%19
IP Address
:
%%20
Tcp Compressio
:
%%21
Tcp Comp Max slot:
%%22
Tcp Comp slot
:
%%23
1. Status of LCP layer (up or down).