Motorola 68P02958C00-B - Manual (Page 138)

Site Table
5-81
Dialog box parameters and functions
Site ID
Click in the cell to enter the Site ID for the site being added. (Note: The Site ID was defined
for the site in its site configuration.)
Retries
Click in the cell to enter the number of attempts to be made to communicate with a non-
responding site. The valid range of retries is 1-255. The default is 1.
Timeout
Double-click to define the time (in seconds) to wait between communication retries. The
minimum value is 1 second; the maximum value is 255 seconds. The default is 30.
Primary Link ID
Click on the down arrow (or double-click in the cell) and select from the list box the link
through which the site is connected to the network.
Primary Link Validity
The Gateway tests communication with the sites on a regular basis. If a site has not responded
for a specific time interval, the link is considered unreachable.
Secondary Link ID
Click on the down arrow and select the proper link (other than the Primary) through which the
RTU is connected to the network from the list box.