Motorola 68P02958C00-B - Manual (Page 402)

Software Diagnostics Output
C-110
## 2527 LEVEL = 107
iDEN modem server description
-----------------------------
Normalized battery level
: %% 1
Color code : %% 2
Carrier : %% 3
Carrier RSSI (dbm) : %% 4
Carrier SQE (db) : %% 5
Battery level : %% of %% 6
Signal strength : %% of %% 7
Obtained via RALP from modem.
1. Battery level 0 to 60.
2. Color code.
3. Carrier code.
4. RSSI, received signal strength, should be more than –100 dbm.
5. SQE, received signal strength in db.
6. Battery level from 1 to 6 (highest).
7. Signal strength from 1 to 6 (highest).
## 2530 LEVEL = 110,111
IPModem statistics:
--------------------
Number of times CD has dropped
: %% 1
Number of times RTU powered up : %% 2
Number of times Registration failed : %% 3
Number of times configuration timeout occured : %% 4
Number of times modem configuration has succeeded : %% 5
Number of times modem configuration has failed : %% 6
Number of times detetected that modem is not packet data : %% 7
Number of times link failed because of registration
: %% 8
Number of times re-registered modem : %% 9
Number of times restarted modem : %%10
Last reason for link failure : %%11
Number of times received icmpnetunreachable : %%12
Number of times lost connection with modem (PPP) : %%13
Number of times disconnect because there was no resonse : %%14
Number of times failed dialup : %%15
Number of times failed hangup : %%16
Number of times failed start slip/ppp : %%17
1. Number of times CD became inactive, e.g. the modem was disconnected or went offline (command
mode).
2. Number of times the RTU powered up (cold or warm restart).
3. Number of times the modem was online and got deregistered from the infrastructure.
4. Number of times the configuration timeout elapsed. This may happen when configuration takes
longer than the time specified by the user in the Modem configuration timeout parameter in the Site