Motorola 68P02958C00-B User Manual
Page 264
IP Gateway Telnet Operation
6-29
Command Format
Description
Site ID of EMU = n1
Link ID of EMU = n2
Port ID of EMU = n3
Port mux # = n3 | N/A
where n1, n2, n3, n4 are numbers.
whoami
Displays the login name used in the current telnet session.
users
Displays the list of valid IP Gateway users.
passwd
Changes the password of the current telnet user.
1. At the prompt, enter the current password.
2. Enter the new password.
3. Confirm the new password.
All users, including the superuser, may perform the passwd
command.
cd
cd
cd
cd /
cd ..
Changes directory to the site or device level.
Takes you to the site level. The prompt changes to
Gateway_Name/site_name> . This command may be
activated at the zone level.
Takes you from the site level to the device level. The
prompt changes to
Gateway_Name/site_name/device_name> . This command
may be activated at the site level.
Takes you to the zone level. The prompt changes to
Gateway_Name> . This command may be activated at both
the site and device levels.
Takes you back to the previous level. The prompt changes
(e.g. from Gateway_Name/site_name/device_name> to
Gateway_Name/site_name> . This command may be
activated at both the site and device levels.
dir
Displays the site list or the device list of a site and may be
activated from the site or device level.
dir (at site level) lists all sites in a zone. (Site Name, Site ID)
dir (at device level) lists all devices in a site.(Device Name,
CPU ID, Port ID, Mux Port #)
dir /t=
in a site.(Device Name, CPU ID, Port ID, Mux Port #)