Motorola 68P02958C00-B - Manual (Page 356)

Software Diagnostics Output
C-64
9. Maximum amount of time to announce no response.
10. Number of idles to announce end of RX.
11. Number of errors.
12. Downloadable module version.
13. Downloadable module revision.
14. Name of the downloadable module.
15. Diagnostic string given by the downloadable module.
## 661 LEVEL = 1
Parm 1 : %%
Parm 2 : %%
Parm 3 : %%
Parm 4 : %%
Parm 5 : %%
Parm 6 : %%
Parm 7 : %%
Parm 8 : %%
Parm 9 : %%
Parm 10 : %%
•
Diagnostics for driver specific parameters for port connected ‘TO PLC’
•
These parameters are actually the driver specific parameters (‘TO PLC’ port). The parameters can be
defined in the PLC expert parameter screen. Currently these parameters are not in use.
FRAME - SEQ
## 700
application identity : %% 1
maximum buffers in ready queue : %% 2
Number of buffers in list : %% 3
Time (in sec) to flush rx frames : %% 4
# rx frames thrown under flush : %% 5
1. Application ID number.
2. Maximum number of frames allowed to be accumulated
3. Number of frames currently waiting in the queue.
4. The amount of time required to flush received frames.
5. The number of frames which were flushed from the received queue.