Motorola 68P02958C00-B - Manual (Page 422)

Software Diagnostics Output
C-130
## 5001 LEVEL = 1
name free id tx burst error
%%1 %%2 %%3 %%4 %%5 %%6
1. The name of the connected clients. (If a row starts with 1, the name field is empty.)
2. Is the client free?
3. The channel ID of the channel used for receiving. (255 means no such channel)
4. The channel ID of the channel used for transmitting. (255 means no such channel)
5. The channel ID of the channel used for burst. (255 means no such channel)
6. Has an error occurred? (255 means no such channel)
## 5005 LEVEL = 10, 11
Reqmng data:
------------
In Buffers
: %%1
Out Buffers : %%2
In Blocks : %%3
Out Blocks : %%4
Out Burst Blocks : %%5
In Buffers with Err : %%6
1. Number of buffers received from the SCADA driver to the IP Gateway for execution.
2. Number of buffers sent from the IP Gateway to the SCADA driver.
3. Number of blocks received from the SCADA driver to the IP Gateway for execution.
4. Number of blocks sent from the IPGW to the SCADA driver.
5. Number of Burst blocks (unsolicited messages) sent from the IP Gateway to the SCADA driver.
6. Number of buffers sent with Error.
Note: Level 10 retrieves the information and resets the Data. Level 11 retrieves this information without
reset.