Motorola 68P02958C00-B - Manual (Page 82)

Site Configuration
5-25
The Zones button appears in the Definition of Port 3 Parameters dialog box when the selected
port type parameters involve zone definitions. Click the Zones button to open the Define
Zones dialog box, shown below.
Dialog box parameters
Unused zones
Click the zone(s) on the left list that you want to select.
Selected zones
Click the zone(s) you want to remove from the current definition.
Add
Click this button to select the zone marked on the left list. The zone name moves to the right
list.
To mark zones non-sequentially, hold CTRL down and click the zones you want. To mark
successive zones, click the first, hold down SHIFT and click the last.
Remove
Click this button to remove a zone from the selected zones (right list).
For details about the marking method, see Add.