Motorola 68P02958C00-B - Manual (Page 197)

5-140
Host Table
General
The Host Table enables users to define all the SCADA/NFM manager host computers in the
system which are connected to a particular IP Gateway. When the hosts have been defined,
they can be downloaded to the IP Gateway. After downloading the Host Table, the IP Gateway
will send SNMP Traps to all the SNMP Type hosts in the Host Table for all the spontaneous
events that occur.
The Host Table Window
To start the Host Table utility, double-click the Host Table icon in the IP Gateway Toolbox
folder. The Host Table Window, as shown below, enables the user to define each host with IP
Address, Host Name, and Host Type. The same window is used to define the hosts for the
NTP Configuration.