FUJITSU PRIMERGY MX130 S2 - Manual (Page 96)

96 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
Figure 34: Removing the HDD from 3.5-inch chassis bay
Ê
Remove the four screws (see circles) and remove the HDD from the drive
bay.
7.6.4 Concluding steps
Perform the following procedures to complete the task:
Ê
Close the front cage as described in section "Closing the front cage" on
page 53 .
Ê
Follow all procedures described in section "Closing the server" on page 54 .