FUJITSU PRIMERGY MX130 S2 - Manual (Page 74)

74 Upgrade and Maintenance Manual MX130 S2
Power supply
Figure 18: Installing the standard PSU
Ê
Insert the PSU into the chassis leaving a gap of about 3 cm to the rear
chassis wall (1) in
figure 17 .
Ê
Ensure that the mounting bracket on the chassis (see circle in figure 18 )
engages with the notch on the lower surface of the PSU.
Ê
Slide the new PSU towards the rear of the chassis (2) in figure 17 .