FUJITSU PRIMERGY MX130 S2 - Manual (Page 144)

144 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
Figure 80: Removing the ODD
Ê
Press the green locking (1) and pull the ODD out of its bay (2).
Ê
Install a new ODD in this bay.
7.20.4 Concluding steps
Perform the following procedures to complete the task:
Ê
Follow all procedures described in section "Closing the server" on page 54 .
Ê
If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
"Enabling
BitLocker functionality" on page 66 .
/
0