FUJITSU PRIMERGY MX130 S2 - Manual (Page 69)

MX130 S2 Upgrade and Maintenance Manual 69
6 Power supply
Basic information
The PRIMERGY MX130 S2 server is equipped with a standard PSU.
V
CAUTION!
The server supports a mains voltage in the range of 100 V - 240 V You
may only operate the server if its rated voltage range corresponds to the
local mains voltage.
Safety notes
V
CAUTION!
●
Do not disassemble the PSU. Doing so may cause electric shock.
●
Areas around the PSU may remain extremely hot after shutdown.
After shutting down the server, wait for hot components to cool down
before removing PSUs.
●
The PSU is heavy, so handle it carefully. If you drop it by mistake,
injuries may result.
●
For further safety information, please refer to chapter "Important
information" on page 31 .