FUJITSU PRIMERGY MX130 S2 - Manual (Page 91)

MX130 S2 Upgrade and Maintenance Manual 91
HDDs and accessible drives
7.4.4 Concluding steps
Perform the following procedures to complete the task:
Ê
Close the front cage as described in section "Closing the front cage" on
page 53 .
Ê
Follow all procedures described in section "Closing the server" on page 54 .
7.5 Installing additional 3.5-inch HDD in 3.5-
inch chassis bay
7.5.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Installing a 3.5-inch HDD
– Phillips PH2 / (+) No. 2 screw driver
7.5.2 Preliminary steps
Before installing a 3.5-inch HDD, perform the following steps:
Ê
Follow all procedures described in section "Opening the server" on page 48 .
Ê
Open the front cage as described in section "Opening the front cage" on
page 52 .
Ê
Locate the correct drive bay as described in section "Mounting order" on
page 82 .
Upgrade and Repair Units (URU)
Average task duration: 5 minutes