FUJITSU PRIMERGY MX130 S2 - Manual (Page 171)

MX130 S2 Upgrade and Maintenance Manual 171
Expansion cards
9.2.4.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Removing expansion cards: tool-less
9.2.4.2 Preliminary steps
Before removing an eSATA cable, perform the following steps:
Ê
Follow all procedures described in section "Opening the server" on page 48 .
9.2.4.3 Disconnecting eSATA cable (optional for specific markets)
Figure 105: Disconnecting the eSATA cable
Ê
Disconnect the end of eSATA cable from the system board connector
SATA6.