FUJITSU PRIMERGY MX130 S2 - Manual (Page 80)

80 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
●
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
●
Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
●
For further safety information, please refer to chapter "Important
information" on page 31 .
In this chapter
●
"Mounting order" on page 82
– 3.5-inch HDD subsystem
●
"Installing 3.5-inch HDD in HDD1 / HDD2 chassis bay" on page 83
●
"Removing 3.5-inch HDD out of HDD1 / HDD2 chassis bay" on page 88
●
"Installing additional 3.5-inch HDD in 3.5-inch chassis bay" on page 91
●
"Removing additional 3.5-inch HDD out of 3.5-inch chassis bay" on page 94
●
"Installing additional 3.5-inch HDD in 5.25-inch dummy cover" on page 97
●
"Removing 3.5-inch HDD out of 5.25-inch dummy cover" on page 100
●
"Installing additional 3.5-inch HDD in 5.25-inch ODD/HDD bracket" on
page 103
●
"Removing 3.5-inch HDD out of 5.25-inch ODD/HDD bracket" on page 106
– 2.5-inch HDD subsystem
I
2.5-inch SATA HDDs available on project request in EMEA market only.
●
"Installing 5.25-inch dummy cover" on page 110
●
"Removing 5.25-inch dummy cover" on page 112
●
"Installing ODD in 5.25-inch chassis bay" on page 115
●
"Removing ODD out of 5.25-inch chassis bay" on page 118
●
"Installing slimline ODD in 5.25-inch ODD/HDD bracket" on page 121
●
"Removing slimline ODD out of 5.25-inch ODD/HDD bracket" on page 125