FUJITSU PRIMERGY MX130 S2 - Manual (Page 106)

106 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
Ê
Connect cables to the HDD.
1 Power cable connector P2 (see "Power cable T26139-Y4012-V211"
on page 239 )
2 SATA cable T26139-Y4028-V153
Ê
Connect cables to the ODD.
3 Power cable connector P4 (see "Power cable T26139-Y4012-V211"
on page 239 )
4 SATA cable T26139-Y4028-V201
7.9.4 Concluding steps
Perform the following procedures to complete the task:
Ê
Close the front cage as described in section "Closing the front cage" on
page 53 .
Ê
Follow all procedures described in section "Closing the server" on page 54 .
Ê
Please observe the notes on RAID rebuild in section "Performing a RAID
array rebuild" on page 67 .
7.10 Removing 3.5-inch HDD out of 5.25-inch
ODD/HDD bracket
7.10.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Installing a 3.5-inch HDD
– Phillips PH2 / (+) No. 2 screw driver