FUJITSU PRIMERGY MX130 S2 - Manual (Page 145)

MX130 S2 Upgrade and Maintenance Manual 145
8 System fan
Basic information
The PRIMERGY MX130 S2 server features one system fan module.
I
Additional fans in PSU and processor heat sink cannot be replaced
individually.
V
CAUTION!
Since the system fan is not redundant is has to be replaced immediately
in case of defects or pre-failure events.
Safety notes
V
CAUTION!
●
Do not damage or modify internal cables or devices. Doing so may
cause a device failure, fire, or electric shock.
●
Devices and components inside the server remain hot after
shutdown. After shutting down the server, wait for hot components to
cool down before installing or removing internal options.
●
Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
●
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
●
If devices are installed or disassembled using methods other than
those outlined in this chapter, the warranty will be invalidated.
●
For further information, please refer to chapter "Important
information" on page 31 .