2 opening the server, 1 shutting down the server, Opening the server – FUJITSU PRIMERGY MX130 S2 User Manual
Page 48: Shutting down the server
48
Upgrade and Maintenance Manual
MX130
S2
Basic hardware procedures
4.2
Opening the server
V
CAUTION!
●
Before removing or installing covers, turn off the server and all
peripheral devices. Also unplug all power cables from the outlet.
Failure to do so can cause electric shock.
●
In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY MX130 S2 server must not run while the server cover is
removed.
●
For further safety information, please refer to chapter
4.2.1
Shutting down the server
V
CAUTION!
For further safety information, please refer to chapter
I
This step is only required when upgrading or replacing non-hot plug
components.
Ê
Inform the system administrator that the server will be shut down and put
offline.
Ê
Terminate all applications.
Ê
Verify if your backup software solution requires preparative configuration
before starting the procedure as described in section
configuring the backup software solution" on page 61
Ê
Remove all backup and optical disk media from backup and optical disk
drives as described in section