1 required tools, 2 preliminary steps, Required tools – FUJITSU PRIMERGY MX130 S2 User Manual
Page 88: Preliminary steps
88
Upgrade and Maintenance Manual
MX130
S2
HDDs and accessible drives
7.4
Removing 3.5-inch HDD out of
HDD1 / HDD2 chassis bay
7.4.1
Required tools
●
Preliminary and concluding steps: tool-less
●
Removing a 3.5-inch HDD: tool-less
7.4.2
Preliminary steps
Before removing a 3.5-inch HDD, perform the following steps:
Ê
Ensure that the HDD to be removed is not combined into a RAID array. If the
drive is part of a RAID array, you first need to delete the array using
ServerView RAID Manager.
V
CAUTION!
All data on all HDDs in the array will be lost! Be sure to back up your
data before deleting a RAID array.
I
For further information, please refer to the "ServerView Suite RAID
Management" user guide, available online at
or from the ServerView Suite DVD 2
supplied with your PRIMERGY server.
Ê
Follow all procedures described in section
"Opening the server" on page 48
.
Ê
Open the front cage as described in section
Upgrade and Repair Units (URU)
Average task duration: 5 minutes