FUJITSU PRIMERGY MX130 S2 - Manual (Page 141)

MX130 S2 Upgrade and Maintenance Manual 141
HDDs and accessible drives
Figure 78: Removing the ODD cover
Ê
Press the ODD cover out from inside to outside of the server cover.
Ê
Remove the ODD cover
7.19.5 Concluding steps
Perform the following procedures to complete the task:
Ê
Close the front cage as described in section "Closing the front cage" on
page 53 .
Ê
Follow all procedures described in section "Closing the server" on page 54 .
Ê
If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
"Enabling
BitLocker functionality" on page 66 .