FUJITSU PRIMERGY MX130 S2 - Manual (Page 129)

MX130 S2 Upgrade and Maintenance Manual 129
HDDs and accessible drives
Figure 67: Removing the fixation plate of the 5.25-inch ODD/HDD bracket
Ê
Remove the fixation plate from the 5.25-inch ODD/HDD bracket.
7.16.4 Concluding steps
Perform the following procedures to complete the task:
Ê
Install the 5.25-inch dummy cover as described in section "Installing 5.25-
inch dummy cover" on page 110 .
Ê
Follow all procedures described in section "Closing the server" on page 54 .
Ê
If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
"Enabling
BitLocker functionality" on page 66 .