ITC IRMA TruPoint Blood Analysis System - Manual (Page 69)

4.3
2. Screens that appear are based on search criteria selection:
a. Search by Date:
a1. The First Date from the previous search
or the current date automatically
displays. Accept displayed date or enter
a new First Date (oldest date) for the
search in the date format displayed at
the top of the screen. Press
next .
a2. The Last Date from the previous search
or the current date automatically
displays. Accept displayed date or enter
a new Last Date (newest date) for the
search in the date format displayed at
the top of the screen. Press
next .
b. Search by Patient ID:
Enter a Patient ID and press next . Only
results associated with that patient ID will
display.
c. Search by Date and Patient ID:
Enter both a date range and a Patient ID and press next . Only results
associated with that date range and patient ID will display.
3. If there are results in memory for the search
criteria entered, the Results Found screen
displays a picklist with test dates and times.
Use the up and down arrows to scroll through
the list of results until the desired result is
highlighted. The analytes reported for that record and patient ID (if
applicable) are shown below the picklist for the highlighted result.
The options available from the Results Found screen are:
a. print all : Proceeds to the Verify Results to
be Printed screen. The search criteria
previously entered displays with the
following options: