beautypg.com

ITC IRMA TruPoint Blood Analysis System User Manual

Page 123

background image

7.27

Automatic device updates occur after IRMA TruPoint results are transferred
to idms or another connected system. After results are sent, the analyzer
requests updates. If updates are available, the transfer will proceed
automatically.

Following software upgrades, DeviceSet automatically restores settings in the
IRMA TruPoint which would otherwise revert to factory default settings.
Configure Automatic Device Updates as follows:

1. Highlight the “on” or “off” button and press

next

to setup the Automatic Results Transfer

feature.

Note:

• QA Users can manually request updates from DeviceSet via the IRMA

TruPoint SETTING OPTIONS menu.

DATE FORMAT

There are 3 date format options:

MM/DD/YY

(Month/Day/Year)

YY/MM/DD

(Year/Month/Day)

DD/MM/YY

(Day/Month/Year)

1. Highlight the desired date format. Press

next

.

DATE/TIME

The date and time are appended to each patient and QC test record, error, and
printer output.

1. Enter the current Date using the previously

established format. Entry of the backslash (/)
is required for a valid date format.

2. Enter the current Time in the format hh:mm,

and select the appropriate label by pressing

am

,

pm

, or

24h

. Entry of the colon (:) is

required for a valid time format (Only QA
users have the privilege to edit a date. All
other users can change the time).