ITC IRMA TruPoint Blood Analysis System - Manual (Page 103)

7.7
Patient ID
There are 3 patient ID options:
• Off: No patient ID information may be entered with a test.
• Optional: A patient ID may be entered when a test is run, but is not
required to be entered.
1. Highlight Optional button and press next .
2. Enter the minimum number of characters that must be entered if a patient
ID is entered (between 1 and 20 characters). Press next .
3. Enter the maximum number of characters that may be entered if a patient
ID is entered (between 1 and 20 characters). Press next .
• Required: Entry of a patient ID is required.
1. Highlight Required button and press next .
2. Enter the minimum number of characters that must be entered (between 1
and 20 characters). Press next .
3. Enter the maximum number of characters that may be entered (between 1
and 20 characters). Press next .
Patient temperature
There are 2 patient temperature options:
• Off: No patient temperature may be entered with a test.
• On: A patient temperature may be entered with a test, and temperature
corrected results will be reported.
Sample type/sample site
There are 2 sample type and sample site options:
• Off: No sample type or sample site information may be entered with a test.
• On: Sample type and/or sample site information may be entered with a
test.
Patient notes/QC notes
There are 2 patient notes and QC notes options:
• Off: No patient or QC notes may be entered with a test.
• On: Patient or QC notes may be entered with a test.