ITC IRMA TruPoint Blood Analysis System - Manual (Page 26)

1.18
1. Enter User ID (optional). If the User ID
option is activated, the Enter or Scan ID
screen will display. The User ID may be
entered using either the alpha/numeric
keypads or the bar code scanner.
a. Entry via touchscreen keypads - enter your User ID and press next.
b. Entry via bar code scanner - scan your User ID. The IRMA TruPoint
display will automatically advance to the next screen.
2. Scan cartridge bar code. A screen instructing
you to Scan cartridge bar code will display at
the appropriate time. Scan the cartridge
package label for the cartridge to be used.
Note: To manually enter and/or verify
cartridge information, press
manual entry .
a. Successful scan - cartridge product type, Lot Code, and Cal Code will
be accepted. The IRMA TruPoint display will automatically advance
to the next screen (the Select Product Type and Verify Information
screens will not be displayed).
b. Scanning Error - the Scanning Error
message will be displayed. The cartridge
bar code may be re-scanned, or the user
may press manual entry to manually enter
and/or verify product type, Lot Code, and
Cal Code.
VUELINK
Please contact your local representative regarding the current availability of
Vuelink.
Description
The Philips/Agilent VueLink module is a component for Philips/Agilent
patient monitors. VueLink allows IRMA TruPoint patient test results to be
transmitted to the Philips/Agilent patient monitor for display.
VueLink Setup
Refer to Section 7-VueLink for IRMA TruPoint VueLink setup instructions.
Patient ID should be configured “Required”.
Refer to the appropriate Philips/Agilent document for monitor operating
instructions and other information related to the Philips/Agilent patient
monitoring system and VueLink.