ITC IRMA TruPoint Blood Analysis System - Manual (Page 13)

1.5
IRMA TRUPOINT AC POWER ADAPTER
The IRMA TruPoint analyzer can be operated on AC power using
the IRMA TruPoint AC power adapter.
• The analyzer will not automatically shut off when the AC adapter is in
use, and can be left on indefinitely.
• After two minutes of inactivity, the analyzer will enter into “sleep
mode” (screen goes dark). The user can return to the last screen
displayed by touching the right side of the screen at anytime during
sleep mode.
• If the user ID feature is enabled, then the user ID screen will be
displayed before the analyzer can be accessed again.
• The analyzer power can be left on indefinitely
• The analyzer can be shut off via the quit button on the main MENU.
Figure 1-4
A. Power Supply and Battery Shell: are permanently connected via
the adapter cord. The battery shell fits into the IRMA TruPoint
battery compartment.
B. Wall Cord: makes connection between the power supply and
electrical wall outlet.