ITC IRMA TruPoint Blood Analysis System User Manual
Page 27

1.19
Transmitting Results to VueLink
1. The patient test results displayed on the
Results screen are transmitted to VueLink
when
done
is pressed, only under the
following conditions:
• The VueLink option in DEVICE SETTINGS is “on”, and;
• The IRMA TruPoint analyzer is connected to a VueLink module
residing in a patient monitor or monitor rack. If there is no connection
between IRMA TruPoint and VueLink, pressing
done
will end the test
and advance IRMA TruPoint to the appropriate screen.
2. The
Sending to VueLink screen displays once
a connection has been established. The user
has 15 seconds to verify that the patient ID
from the test record transmitted matches the
patient ID entered into the patient monitor.
a. Patient ID verified within allotted time - test results display on the
patient monitor and the IRMA TruPoint advances to the appropriate
screen, depending on setup.
b. Patient ID not verified within allotted time - test results do not
display on the patient monitor and the IRMA TruPoint advances to the
appropriate screen, depending on setup.
Transmission Errors
If a connection is made, but the transmission is
unsuccessful, an error message will display.
a. Resend - verify connections and receiving
system and press
resend
button.
b. Cancel transmission - press
cancel
button.
Transmitting Recalled Results
All IRMA TruPoint patient test results can be recalled and transmitted to
VueLink.
• A result can be transmitted multiple times.
• A result cannot be edited in IRMA TruPoint once it has been transmitted
to VueLink.
• Transmitting a result to VueLink does not affect its sent/unsent status for
transmission to idms or a host system.