Applying firewall exceptions, Required wmdc work network connection setting, Required – IntelliTrack Check In/Out User Manual
Page 61: Please refer to, For more, Required wmdc work network connection setting” on, Required wmdc work net
Chapter 2
DMS CE Batch Setup
31
Required WMDC Work Network Connection Setting
Before you install the DMS Batch Portable application on the handheld
device, you must have WMDC installed and configured for work network
communication on the PC where the handheld device(s) will be connected.
Applying Firewall Exceptions
Important:This is an advanced setting. Please consult your network
administrator before applying any firewall exceptions.
This section applies to computers that use an installed firewall or the Win-
dows firewall. In order for IntelliTrack batch data syncing to take place
when you use a firewall, the following ports must be set as exceptions:
•
IntelliTrack License Service Port: 15313 is the default port setting that
IntelliTrack uses; Protocol: TCP
•
IntelliTrack SQL Server Port: 1433; Protocol: TCP
•
IntelliTrack SQL Server Port: the workstation needs to be able to
accept inbound UDP connections from the SQL Server.
•
HTTP Port 80; Protocol: TCP
2283.book Page 31 Thursday, July 7, 2011 2:29 PM