Installing the ce client, Reaching your device installer, Retrieving your device installer from the hardware – IntelliTrack Inventory Shipping Receiving Picking (ISRP) User Manual
Page 61: Support matrix
Chapter 4
Installing the CE Client
49
Installing the CE Client
Once you complete the Batch installation prerequisites, including:
•
Determining your Remote Data Access Setup;
•
Installing IIS;
•
Installing ActiveSync or Windows Device Center Software and estab-
lishing a partnership between your computer and your device;
•
Applying the required firewall exceptions (see
);
•
Installing the IntelliTrack workstation application and configuring IIS
dependencies; and
•
Determining your Device Installation;
you are ready to install the ISRP application to the handheld device.
Follow the instructions in
“Installing the CE Client” on page 47
to install the
CE Client application on the handheld device.
Reaching your Device Installer
Download the installer from the IntelliTrack website at the Hardware Sup-
port Matrix For more information about reaching the mobile device
installer please refer to the next section:
“Retrieving your Device Installer
from the Hardware Support Matrix” on page 49
.
Retrieving
your Device
Installer from
the Hardware
Support
Matrix
To download your device installer from the Hardware Support Matrix,
please follow these steps:
1.
To download your device installation from the IntelliTrack Hardware
Support Matrix: open your Internet browser and go to the following
. The IntelliTrack website Home page
appears. From the IntelliTrack website, select Support > Hardware
Support Matrix from the menu bar. The Hardware Support Matrix
page appears.
Or, open the Batch Portable Utility via the ISRP workstation. Select
Portable > Synchronize CE Device > Synchronize CE Device to
open the Batch Utility. From the Batch Utility, select CE Portable >